Procedure
for a Goods train to work without Brake Van (GR/SR 4.25)
Ø In emergency short distance pilot/Goods trains may be worked
without BV under specific orders of Sr DOM/DOM.
Ø Fully vacuum / Air
braked and SE / JE (C & W) to certify
Ø Guard shall travel
be in Engine
Ø Before starting – SM
to give number of last wagon to control.
Ø While asking Line
Clear – each SM to give last number to next SM – TSR entry to be made.
Ø Tail Board &
Tail Lamp to be fixed in last vehicle
Ø Guard to keep sharp
look out
Ø Train may run at the
booked speed.
Ø When train stops for
crossing SM to give the last vehicle number to Control.
Goods train to work without Guard
Ø Fully vacuum / Air
braked and SE / JE (C & W) to certify.
Ø ALP to travel in
Brake van if possible
Ø Duties of Guard –
devolve on LP
Ø Caution Order to be
issued – informing the absence of Guard and requiring him to perform the duties
of Guard.
Ø Tail Lamp & Tail
Board to be fixed –LP to ensure
Ø Train may run at the
booked speed.
Ø LP to keep sharp
look out.
Goods train to work without Guard and Brake
Van
Ø Fully vacuum / Air
braked and SE / JE (C & W) to certify.
Ø SM to advise Last
Vehicle number to control
Ø When asking Line
Clear – number to be intimated to next SM & TSR entry to be made.
Ø Train may run at the
booked speed.
Ø Duties of Guard –
devolve on LP
Ø Caution Order issued
- informing the LP about the absence of Guard.
Ø Tail Lamp or Tail
Board put on, Fouling mark ensured
Ø During Crossing – SM
to give the last vehicle number to Control & exchange PN.
Note:
Working of trains without Guard/BV/Both is not permitted during TIC and in Ghat
sections.
