Trouble shooting for Throttle not Responding

Reasons	Remedies
Mcp Restriction message	Troubleshoot
MCB OFF / Tripped (ERS in GE)	Switch ON / Reset
DMR not energizing due to MCH / TH not in Idle / defect	Keep in Idle / Check MCH coupler / Change C/stand. Energize DMR manually
PCS2 operated  Less BP pressure  PCS2 COC closed  PCS 2 defect	§  Ensure Sufficient BP Pressure. §  Open §  Switch ON Eme. DMR / PCS2 Switch / Short PCS2 terminals
DMR defects (PCR in GE)  Terminal disconnected  Coil open circuit or I/Ls defect	Secure Switch ON Eme. DMR / Contact shed
DMR energizing in IDLE but de – energizes  while moving TH to 1st Notch	Check DMR I/Ls If unsuccessful – Switch ON Eme. DMR
ECS not in RUN	Keep in RUN. Use DID soft key in Ver. 3
Amphenol plug uncoupled (WW gov.)	Re-Connect
Power Ground	Reset
Generator Field Overload	Reset
VCD / AFL operated / defective	Reset / contact shed
BKT not in motoring	Set manually
Rectifier fuse blown	Contact shed
Mcp / BP sensor defect	Contact shed
ABCR de-energized (GE Mcp)	Check terminals / contact shed